Jandel Macor four point probe
The Jandel Macor Probe head is suitable for use in a wide range of temperatures - approximately -190C to 300C (around 80K to 600K).
Datasheets
Jandel Engineering manufactures products which are made to enhance the probe stands and probe heads on offer.
Jandel High Vacuum four point probe
The Jandel High Vacuum Probe head is an adapted cylindrical probe head. The high vacuum probe has no blind holes, minimial solder and is unanodised
Jandel Hall Effect four point probe
The Jandel Hall Effect Probe has a lower profile than our standard probes (around 18mm). The probe has the required square layout (only available in 2mm spacing square array). However please note that we offer only the probe, we do not offer the magnets or mountings for a complete system.
Jandel Very Close Spacing probe
This probe uses a staggered jewel arrangement in order to acheive probe spacing of 0.500mm spacing. The picture compares a 'standard' 1.591mm spacing probe with the 0.500mm spacing probe. This probe can be used for probing close to sample edges or where a sample has very small dimensions.