Jandel Multiposition Wafer Probe Stand

Jandel Engineering Limited offers the Multiposition Probe stand as a solution for measurements on wafers up to 200mm diameter. The probe stand is available in two sizes at the same cost. One size is for wafers up to 150mm diameter and the second for wafers up to 200mm diameter. If small sized wafers are to be measured the smaller version is more suitable for placement of the wafers on the measurement table. The Θ movement clicks in four positions at 90 degrees and the linear movement in up to 10 positions, giving repeat placement accuracy of +/- 1mm.

    Enquiry form

    This message will be sent to your local Jandal distributor, fill in the fields below and we will get back to you soon.

    Your privacy: We will not store or use your details for any other purpose other than to correspond with you about this enquiry. You can read our privacy policy here.

    Max. sample size150mm wafer (200mm wafer on request at no extra cost)
    Max. sample thicknessSamples up to 4mm thick can be measured
    MicroswitchPrevents current flow when probe is not in contact with the sample
    Manual controlSimple lever operation for probe contact and removal
    Simple set upSingle wire connects the probe stand and measurement electronics
    X-Θ StageRepositioning accuracy of +/- 1mm

    Want to know more?

    If you require any further information or have an enquiry contact us

    Product FAQs

    Who is Jandel Engineering Ltd?
    Jandel Engineering was established in 1967. Prior to founding Jandel Engineering, Managing Director John Clark worked for A & M Fell in London. It was at this company that the first commercially available four point probe head, the 'Fell' probe head, was designed by John Clark and a colleague. Since this original design many improvements have been introduced.
    Why use Jandel probes?
    Jandel Probes offer the accuracy and perfection of more than 30 years experience. Tip radii and probe spacings are checked by interferometer and video inspection for certainty of accuracy. Spring loadings are checked by electronic force gauge. Unique Standard specifications include: 1) Upper and lower guides are jewelled 2) Solid tungsten carbide needles for superior durability and accuracy 3) Teflon insulation giving minimum leakage